Military Antennas Automotive Antennas General Aviation Antennas Marine Antennas
Product Catalog
< Previous  1    2    3    4    5  Next >
11)
View Details
Model Number: AT-803/VRC
Part Number: SM-D-345512
NSN: 5985-00-543-1984
Product Name: Antenna AT-803/VRC
Description: The AT-803/VRC Antenna is designed for omni-directional UHF communications. The antenna is an unbalanced, broadband coaxial stub antenna for vehicular application. Mounting is achieved with four (4) 1/4 bolts. The antenna is manufactured and qualified to the U. S. Army CECOM drawing SM-D-345512.
12)
View Details
Model Number: NTDR
Part Number: NTDR
Product Name: Antenna NTDR
Description: The NDTR Antenna is an omni-directional vertically-polarized antenna designed for use on ground vehicles. The antenna is broadband and covers the frequency range of 225 to 450 MHz. The antenna will meet the requirements of Military Specification MIL-STD-810 for environmental performance. The antenna is mounted with a four (4) bolt pattern and uses a Type "N" female connector.
13)
View Details
Model Number: OE-254/GRC
Part Number: SM-D-944752
NSN: 5985-01-063-1574
Product Name: Antenna OE-254/GRC
Description: The OE-254/GRC Antenna Group is designed for broadband omni-directional ground-based communications. It is intended for use with Radio Sets AN/VRC-12, AN/VRC-43 through AN/VRC-49, AN/VRC-53, AN/VRC-64, AN/GRC-125, and AN/GRC-160 but will also function with the AN/PRC-25 and AN/PRC-77 Radio Sets. The antenna group is produced to Military Specification MIL-A-49204 and can withstand 90 mph winds without ice coating and 60 mph winds with 0.5 in of radial ice coating the entire antenna and remain erect and operational. The antenna group is stowed in a transit bag and spare antenna elements, guy assemblies, guy plates, and stake assembly are included. Artwork detailing assembly and erection procedures and stowing instructions are sewed integral with the bag. The Antenna Group OE-254/GRC is designed for use in all climates and terrains.
14)
View Details
Model Number: OE-303/GRC
Part Number: A3010408
NSN: 5985-01-152-5845
Product Name: Antenna OE-303/GRC
Description: The OE-303/GRC Antenna, which was designed by R.A. Miller Industries for the U.S. Army, is a directional half rhombic antenna. It consists of the AB-1244/GRC mast and the AS-3490/GRC Antenna. Fully erected it stands about 30 ft. This antenna group is supplied in two canvas packs designed to stow and transport the antenna's components. It is designed to be quickly erected and quickly lowered. This antenna was designed to extend the range of the radio set beyond that available from low elevation whip antennas of mast-mounted omni-directional antennas. This antenna was designed to meet the requirements of Military Specification CR-CE-0012-001.
15)
View Details
Model Number: RAMI254
Description: The RAMI254 is a direct replacement for the OE-254/GRC Antenna Group. It is comprised of fewer piece parts, allowing for quicker assembly and erection, along with being capable of both VHF (30-88 MHz) and UHF (225-450 MHz) operation modes. It can be deployed atop its 27 foot mast or utilized on the ground standing on its tripod base. It is manjfactured to meet the mechanical and environmental specifications as called out in MIL-PRF-49204 (OE-254/GRC specifications). The antenna comes complete with 70 feet of RF-213 transmission line (antenna to diplexer) and two 5 foot RG-213 Transmission lines (Diplexer to radio set). Additional components for full assembly and erection (mast or ground deplyed) are included in the transit bag.
< Previous  1    2    3    4    5  Next >

Land-Based Part Search: